DUST COLLECTION HOPPERS

Engineered for safety and economy. Bump Release Hoppers are innovative and automatically dump on contact with the roll-off container. Hoppers are perfectly balanced to roll forward when loaded, dump completely and automatically return to upright, locked position ready for reloading. Continuous welding helps to prevent dripping of wet materials (leak-proof hoppers are available upon request). Formed smooth edge around top and pouring lip for safety and strength. Extended sides prevent side-wise scattering of material. 

Safe Operations Video

Safe Operating Instructions & Precautions for Dust Collection Self-Dumping Hoppers

• LATCH HOLDER:  Latch should be locked in position, except when dumping. 
  
• PICKING UP HOPPER: Insert forks into the opening of the base, spreading forks as far as possible. Forks should not extend past the front of the base.
  
• TRANSPORTING HOPPER: Lift with forks and tilt mast back to prevent slippage. Transport one unit at a time, keeping the hopper at a minimum practical height. 
  

• DUMPING HOPPER: 
• Keeping the mast tilted back, unlock the safety latch and attach the safety chain to themast of the forklift.
• Unlock clamps on the side of the hopper lid and raise the lid. Once the lid is raised, place the safety pin into the hole of the bracket on top of the lid.
• Raise forks to desired dumping height/position.
• Then, remaining clear of hopper (especially rocker area), drive slowly toward the edge of the roll-off bin/container.
• Slightly tilt the mast forward and release the handle to engage the hopper. Once engaged, the hopper will tilt forward allowing contents to dump.

• RELATCHING HOPPER:  To relatch the hopper, tilt the mast back and make sure the safety latch is in the locked position.
  
• ADDITIONAL  PRECAUTIONS:
• Before and during dumping, ensure the area is clear of debris and people.
• Do not exceed capacity of lift truck, hopper or operator.
• Never use hopper in need of repairs.